VHS

Reinforcing sleeves

for thin-walled tubes

Type (Cust.) Art. no. D1 d L CAD Legend
Type VHS-04 Art. no. 706.0030.059 D1 2.5 mm d 4.0 mm L 15.5 mm CAD Download
pcs
Type VHS-05 Art. no. 706.0030.056 D1 3.5 mm d 5.0 mm L 15.5 mm CAD Download
pcs
Type VHS-06 Art. no. 706.0030.080 D1 4.5 mm d 6.0 mm L 15.5 mm CAD Download
pcs
Type VHS-07 Art. no. 706.0030.105 D1 5.5 mm d 7.0 mm L 17.0 mm CAD Download
pcs
Type VHS-08 Art. no. 706.0030.103 D1 6.5 mm d 8.0 mm L 17.0 mm CAD Download
pcs
Type VHS-09 Art. no. 706.0030.122 D1 7.5 mm d 9.0 mm L 17.0 mm CAD Download
pcs
Type VHS-10 Art. no. 706.0030.121 D1 8.5 mm d 10.0 mm L 17.0 mm CAD Download
pcs
Type VHS-11 Art. no. 706.0030.144 D1 9.5 mm d 11.0 mm L 18.0 mm CAD Download
pcs
Type VHS-12 Art. no. 706.0030.154 D1 10.0 mm d 12.0 mm L 18.0 mm CAD Download
pcs
Type VHS-13 Art. no. 706.0030.153 D1 11.5 mm d 13.0 mm L 18.0 mm CAD Download
pcs
Type VHS-14 Art. no. 706.0030.165 D1 12.0 mm d 14.0 mm L 18.0 mm CAD Download
pcs
Type VHS-15 Art. no. 706.0030.181 D1 13.0 mm d 15.0 mm L 18.0 mm CAD Download
pcs
Type VHS-16 Art. no. 706.0030.185 D1 14.0 mm d 16.0 mm L 22.0 mm CAD Download
pcs
Type VHS-17 Art. no. 706.0030.207 D1 15.0 mm d 17.0 mm L 22.0 mm CAD Download
pcs
Type VHS-18 Art. no. 706.0030.206 D1 16.0 mm d 18.0 mm L 22.0 mm CAD Download
pcs
Type VHS-19 Art. no. 706.0030.225 D1 17.0 mm d 19.0 mm L 18.0 mm CAD Download
pcs
Type VHS-20 Art. no. 706.0030.224 D1 18.0 mm d 20.0 mm L 18.0 mm CAD Download
pcs
Type VHS-21 Art. no. 706.0030.210 D1 19.0 mm d 21.0 mm L 21.5 mm CAD Download
pcs
Type VHS-22 Art. no. 706.0030.252 D1 20.0 mm d 22.0 mm L 24.0 mm CAD Download
pcs
Type VHS-24 Art. no. 706.0030.285 D1 22.0 mm d 24.0 mm L 18.0 mm CAD Download
pcs
Type VHS-25 Art. no. 706.0030.284 D1 23.0 mm d 25.0 mm L 18.0 mm CAD Download
pcs
Type VHS-31 Art. no. 706.0030.355 D1 28.5 mm d 31.0 mm L 18.0 mm CAD Download
pcs
Type VHS-32 Art. no. 706.0030.320 D1 29.5 mm d 32.0 mm L 23.0 mm CAD Download
pcs
Type VHS-33 Art. no. 706.0030.354 D1 30.0 mm d 33.0 mm L 23.0 mm CAD Download
pcs
Type VHS-38 Art. no. 706.0030.996 D1 35.5 mm d 38.0 mm L 24.0 mm CAD Download
pcs

Reinforcing sleeves

for thin-walled tubes

SO Code: -
Art. no.: -

Technical details

d=tube inside diameter
Assembly:
Insert sleeve into tube up to the knurled edge. Use a hammer (plastic or hard rubber) to drive in the sleeve all the way. This will cause the knurled neck to be pressed into the inner wall of the tube and will secure the neck against being dislocated or falling out.

Information on which tube is recommended for use with reinforcing sleeves can be found in Section i under “Recommendations for stainless steel tubes”.

Documents

  • Technical information cutting ring fitting Download
  • Assembly instructions cutting / clamping ring fitting Download
Assembly:
Insert sleeve into tube up to the knurled edge. Use a hammer (plastic or hard rubber) to drive in the sleeve all the way. This will cause the knurled neck to be pressed into the inner wall of the tube and will secure the neck against being dislocated or falling out.

Information on which tube is recommended for use with reinforcing sleeves can be found in Section i under “Recommendations for stainless steel tubes”.

Documents

  • Technical information cutting ring fitting Download
  • Assembly instructions cutting / clamping ring fitting Download